|
DOUBLE DRUM MINE HOISTS
DOUBLE DRUM 168”
CIR S/N 1634B, 168” x 115”, both drums clutched, 2-1/8” rope, line speed 2650 FPM, rope pull 85,000 lbs. Electrics, 2 x 2250 HP, 500 RPM, DC Motors, Spare Hoist Motors 2 x 1750 KW.
DOUBLE DRUM 120”
CIR Nordberg S/N 29787, 120” x 60”, one drum clutched (friction), 1-1/2” rope, line speed 1500 FPM, rope pull 37,000 lbs. Electrics, 2 x 1400 HP DC motors.
Nordberg S/N 2030-0803, 120” x 72”, both drums clutched, 1-1/4” rope, line speed 800 FPM, rope pull 26,380 lbs. Electrics, 2 x 200 HP, 440 RPM, 440 Volt AC motors, complete with G.E. controls.
DOUBLE DRUM 108”
Nordberg S/N 7030-1278, 108” x 45”, both drums clutched, 1-1/2” rope, line speed 1015 FPM, rope pull 38,000 lbs. Electrics, 500 HP, 650 RPM, 500 Volt DC Motor complete with GE 6160 Silpac Thyristor Converter.
DOUBLE DRUM 96”
Nordberg S/N 2030-0798, 96” x 80”, one drum clutched, 1-1/2” diameter rope, line speed 1015 FPM, rope pull 37,000 lbs. Electrics, 800 HP Induction Motor.
FHB S/N 29333, 96” x 48”, one drum clutched, 1-1/8” rope, line speed 1040 FPM, rope pull 18,300 lbs.
Electrics, 385 HP, 400 RPM, 2200 Volt AC motor, complete with controls.
DOUBLE DRUM 84”
Coeur d’Alene S/N 69-90154, 84” x 63”, both drums clutched, 1-1/2” rope, line speed 1200 FPM, rope pull 24,000 lbs. Electrics, 700 HP, 705 RPM, 4000 Volts AC complete with G.E. 7 Step AC Grid Control
Nordberg S/N 2030-0499, 84” x 52”, one drum clutched, 1-1/4” rope, line speed 1250 FPM, rope pull 18,500 lbs. Electrics, 500 HP, 585 RPM, 4160 Volt AC motor.
DOUBLE DRUM 72”
CIR S/N 1529B, 72” x 48”, one drum clutched, 1” rope, line speed 1000 FPM, rope pull 15,000 lbs. Electrics, 400 HP, 500 RPM, 2200 Volt AC motor.
DOUBLE DRUM 62”
Coeur d’Alene S/N 1959-8, 62” x 52-1/2”, both drums clutched, 1-1/2” rope, line speed 800 FPM, rope pull 25,000 lbs. Electrics, 400 HP, 443 RPM, 440 Volt AC motor, complete with primary and secondary controls.
DOUBLE DRUM 60”
CIR S/N 1760B, 60” x 36”, one drum clutched, 1” rope, line speed 815 FPM, rope pull 14,000 lbs. Electrics, 2 x 250 HP, 580 RPM, 2200 Volt AC motor, complete with controls.
CIR S/N 1701B, 60” x 48”, one drum clutched, 1” rope, line speed 1040 FPM, rope pull 14,000 lbs. Electrics, 300 HP, 720 RPM, 2300 Volt AC motor.
CIR S/N 1736B, 60” x 48”, one drum clutched, 1” rope, line speed 1020 FPM, rope pull 14,000 lbs. Electrics, 250 HP, 580 RPM, 550 Volt AC motor, complete with controls.
Back to Top>>
|
 |
| SINGLE DRUM MINE HOISTS
SINGLE DRUM 144”
Nordberg S/N 31988, 144” x 106”, 1-7/8” rope, one post brake, line speed 1250 FPM, rope pull 31,000 lbs., powered by 900 HP, 450 RPM, 600 Volt DC motor, MG Set 800 HP, 2300 Volts Synchronous Motor, and 750 KW Generator.
SINGLE DRUM 120”
Allis Chalmers S/N 1-0730-54350, 120” x 60”, 1-1/8” rope, one post brake, one pinion drum brake, line speed 712 FPM, rope pull 26,000 lbs., powered by 600 HP, 300 RPM, 250 Volt DC motor, MG Set 725 HP, 2300 Volts synchronous motor, complete with electric controls.
ASEA S/N 308, 120” x 72”, 1-3/8” rope, disc brakes, ASEA double reduction gear box, line speed 1200 FPM, rope pull 24,000 lbs., powered by a 480 HP, 800 RPM, 440 Volt DC motor, MG Set 500 HP, 50 Hz, 3300 Volt synchronous motor, 390 KW, 4440 Volt DC generator.
SINGLE DRUM 96”
Coeur d’Alene S/N 71-92120, 96” x 48”, 1-5/8” rope, two post brakes, line speed 772 FPM, rope pull 25,000 lbs., powered by a 600 HP, 885 RPM, 4000 Volt AC motor, complete with electrical switchgear.
SINGLE DRUM 84”
Coeur d’Alene S/N 69-90155, 84” x 60”, 1-1/2” rope, two post brakes, gear reducer and helical gear set, line speed 800 FPM, rope pull 17,000 lbs. Powered by a 500 HP, 700 RPM, 4000 Volts AC motor complete with G.E. 7 step AC Grid control.
Coeur d’Alene S/N 70-90887, 84” x 36”, 1-1/2” rope, two post brakes, Westinghouse gear reducer and helical gear set, line speed 400 FPM, rope pull 17,500 lbs., powered by a 250 HP, 705 RPM, 4000 Volt AC motor complete with controls.
SINGLE DRUM 83”
Coeur d’Alene S/N S44C002, 83” x 79-1/2”, 2” rope, one post brake, one pinion drum brake, Western gear reducer and gear set, line speed 285 FPM, rope pull 62,000 lbs., powered by 2 x 300 HP, 1150 RPM, 300 HP DC motors, complete with controls, thyristor converter.
SINGLE DRUM 78”
Nordberg S/N 7030-1094, 78” x 66”, 1-1/2” rope, one post brake, one pinion drum brake, double reduction gearing, line speed 450 FPM, rope pull 40,000 lbs., powered by a 250 HP, 884 RPM, 4160 Volt AC motor.
SINGLE DRUM 48”
Pikrose S/N 36381, 48” x 22”, ¾” rope, two post brakes, line speed 90 FPM, rope pull 11,200 lbs., electric over hydraulic powered by a 75 HP, 1800 RPM motor, complete with controls.
SINGLE DRUM 45”
CIR S/N 1672B, 45” x 30”, line speed 300 FPM, rope pull 8000 lbs, Powered by a 150 HP AC motor.
KOEPE
Canadian General Electric 6 rope Koepe hoist, 170” diameter, 2-1/8” diameter ropes, line speed 2920 FPM, designed out of balance 105000 lbs, total suspended load 578000 lbs, 16 Axidisc spring applied – air release disc brakes, powered by a GE direct coupled overbearing motor, 9500 HP, 65.6 RPM DC motor, power conversion by 12 pulse thyristor converter.
Canadian General Electric 6 rope Koepe hoist, 120” diameter, 1.25” diameter ropes, line speed 1500 FPM, designed out of balance 32000 lbs, total suspended load 257000 lbs, 8 Axidisc spring applied – air release disc brakes, powered by a GE direct coupled overbearing motor, 1500 HP, 47.7 RPM DC motor, power conversion by thyristor converter.
ASEA 4 rope Koepe hoist, 84” diameter, 13/16” diameter ropes, line speed 2000 FPM, shaft depth 2700 ft., designed out of balance 7.5 tons, maximum load 82,000 lbs., disc brakes, powered by ASEA LA605 direct coupled overbearing motor, 600 HP, 91 RPM, 440 Volt DC motor, MG Set ASEA 700 HP, 1200 RPM synchronous motor, complete with electric control with A10 programmer and ASEA winder regulator and log-on trip recorder.
Back to Top>>
|
|
| STAGE WINCHES (RENT ONLY) |
| Availabilty: |
Winch: |
| Four (4) |
Hepburn Model HEI-04-1303, rope pull 100,000 lbs, 20 FPM, drum capacity 11,000 feet of 1-3/4” rope, disc brake, powered by a 75 HP motor. |
| Three (3) |
New Era Model F2003-GA-85, rope pull 85,000 lbs, 10 FPM, drum capacity 4,500 feet of 1-5/8” rope, disc brake, powered by a 40 HP motor. |
| Three (3) |
New Era Model F807, rope pull 60,000 lbs., line speed 18 / 26.6 FPM, drum capacity 7,135 feet of 1-3/8” rope, powered by a 50 HP motor. |
| Four (4) |
New Era Model F803, rope pull 50,000 lbs., line speed 37.5 FPM, drum capacity 10,800 feet of 1-1/8” rope, powered by a 50 HP motor. |
| Three (3) |
New Era Model F8101, rope pull 50,000 lbs., line speed 7 / 14.1 FPM, drum capacity 5,000 ft of 1-1/8” rope, powered by a 15 HP motor. |
| Four (4) |
New Era Model F602, rope pull 45,000 lbs., line speed 18.8 / 22 FPM, drum capacity 7,200 ft of 1-1/32” rope, powered by a 40 HP motor. |
| Two (2) |
New Era Model F8008, rope pull 40,000 lbs., line speed 25.4 / 30.6 FPM, drum capacity 5,330 ft of 1-1/8” rope, powered by a 40 HP motor. |
| Five (5) |
Timberland SSK360-1-20E, rope pull 36,000 lbs, line speed 16.1 / 21.2 FPM, drum capacity 1,730 ft of 1-1/4” rope, powered by a 20 HP motor. |
| One (1) |
New Era Model F910, rope pull 33,000 lbs., line speed 15.6 / 17.5 FPM, drum capacity 3,300 ft of 1-1/8” rope, powered by a 20 HP motor. |
| One (1) |
Timberland Model SSK300-1-25E, rope pull 30,000 lbs., line speed 20.5 / 31.9 FPM, drum capacity 2007 ft of 1” rope, powered by a 25 HP motor. |
| Two (2) |
Timberland Model SSK300-1-20E, rope pull 30,000 lbs., line speed 19 / 43 FPM, drum capacity 4,250 ft of 7/8” rope, powered by a 20 HP motor. |
| One (1) |
Lantec Model 540, rope pull 27,000 lbs, line speed 56 / 107 FPM, drum capacity 3,100 ft of 7/8” rope, powered by a 30 HP motor over hydraulic. |
| Three (3) |
New Era Model NE810, rope pull 24,000 lbs., line speed 18.6 / 20.8 FPM, drum capacity 3,200 ft of 1-1/8” rope, powered by a 20 HP motor. |
| Two (2) |
Timberland SSK220-1-15E, rope pull 24,000 lbs., line speed 18 / 26 FPM, drum capacity 648 ft of 1” rope, powered by a 15 HP motor. |
| One (1) |
New Era Model F501-1-MOD, rope pull 20,000 lbs., line speed 14 / 21.3 FPM, drum capacity 4,950 ft of 1” rope, powered by a 20 HP motor. |
| Two (2) |
New Era Model F810, rope pull 20,000 lbs., line speed 15.3 / 22.8 FPM, drum capacity 3,400 ft of ¾” rope, powered by a 15 HP motor. |
| Two (2) |
New Era Model F-77-601, rope pull 20,000 lbs., line speed 27.9 / 41.8 FPM, drum capacity 12,000 ft of 1-3/8” rope, powered by a 25 HP motor. |
| Four (4) |
New Era Model F601, rope pull 20,000 lbs., line speed 7 / 11 FPM, drum capacity 3,900 ft of 7/8” rope, powered by at 10 HP motor. |
| Two (2) |
Timberland Model SSK110-1-10E, rope pull 12,000 lbs., 24 / 42 FPM, drum capacity 1,015 ft of 3/4” rope, powered by a 10 HP motor. |
| One (1) |
New Era Model B77-606-2, rope pull 6,000 lbs., line speed 150 FPM, drum capacity 4,000 ft of 5/8” rope, powered by a 55 HP motor.
Back to Top>> |
|
| UTILITY HOISTS
MAN RIDING (RENT ONLY)
|
| Availabilty: |
Hoist: |
| One (1) |
Timberland Model MCH340-1-2x250EH, electric / hydraulic, rope pull 24,000 lbs., line speed 500 FPM, drum capacity 3,480 ft of 1-3/8” diameter rope, powered by 2 x 250 HP motors. |
| One (1) |
Timberland Model MCH-450-1-200EH, electric / hydraulic, rope pull 24,000 lbs., line speed 200 FPM, drum capacity 2,500 ft of 1” rope, powered by a 200 HP motor. |
| One (1) |
Timberland Model P58-1-2x150EH, electric / hydraulic, rope pull 12,000 lbs, line speed 425 FPM, drum capacity 3,200 ft of 3/4” rope, powered by 2 x 150 HP motors. |
| Two (2) |
Timberland Model PH65-1-60EH, electric / hydraulic, rope pull 6,500 lbs., line speed 200 FPM, drum capacity 1,520 ft of 3/4” rope, powered by a 60 HP motor.
Back to Top>> |
|
| Availabilty: |
Hoist Motor: |
| One (1) |
General Electric 1250 HP, 592 RPM, 60 Cycle, 3 Phase, 2300 Volt |
| One (1) |
Westinghouse 1250 HP, 440 RPM, 60 Cycle, 3 Phase, 4160 Volt |
| One (1) |
Allis Chalmers 700 HP, 506 RPM, 60 Cycle, 3 Phase, 2300 Volt |
| One (1) |
General Electric 600 HP, 443 RPM, 60 Cycle, 3 Phase, 2300 Volt |
| One (1) |
General Electric 500 HP, 885 RPM, 60 Cycle, 3 Phase, 2400/4160 Volt |
| One (1) |
Westinghouse 500 HP, 593 RPM, 60 Cycle, 3 Phase, 2300 Volt |
| One (1) |
English Electric 400 HP, 585 RPM, 60 Cycle, 3 Phase, 575 Volt |
| One (1) |
English Electric 400 HP, 593 RPM, 60 Cycle, 3 Phase, 550 Volt |
| One (1) |
Bruce Peebles 400 HP, 580 RPM, 60 Cycle, 3 Phase, 550 Volt |
| One (1) |
General Electric / Westinghouse 250 HP, 720 RPM, 3 Phase, 2200 Volt |
| One (1) |
Allis Chalmers 250 HP, 705 RPM, 60 Cycle, 3 Phase, 2200 Volt |
| One (1) |
General Electric 150 HP, 585 RPM, 60 Cycle, 3 Phase, 2300 Volt |
| One (1) |
General Electric 150 HP, 580 RPM, 60 Cycle, 3 Phase, 550 Volt |
| One (1) |
General Electric 60 HP, 475 RPM, 50 Cycle, 3 Phase, 440 Volt
Back to Top>> |
|
